Question: What Port Does A Shared Printer Use?

Is port 139 required for SMB?

What Are Ports 139 And 445.

SMB has always been a network file sharing protocol.

As such, SMB requires network ports on a computer or server to enable communication to other systems.

SMB uses either IP port 139 or 445..

Should I open port 139?

If you are on Windows-based network that is running NetBios, it is perfectly normal to have port 139 open in order to facilitate that protocol. If you are not on a network using NetBios, there is no reason to have that port open.

What port is file and printer sharing?

Microsoft file sharing SMB: User Datagram Protocol (UDP) ports from 135 through 139 and Transmission Control Protocol (TCP) ports from 135 through 139. Direct-hosted SMB traffic without a network basic input/output system (NetBIOS): port 445 (TCP and UPD).

How do I connect to a shared printer?

Follow these steps:Select Start, Control Panel to open the Control Panel window.Click the Printer link under the Hardware and Sound icon. … Click Add a Printer in the task pane to open the Add Printer Wizard.Click Add a Network, Wireless or Bluetooth Printer. … Select the network printer you want to use.Click Next.More items…•May 28, 2008

What is port 445 commonly used for?

TCP port 445 is used for direct TCP/IP MS Networking access without the need for a NetBIOS layer. This service is only implemented in the more recent verions Windows starting with Windows 2000 and Windows XP. The SMB (Server Message Block) protocol is used among other things for file sharing in Windows NT/2K/XP.

How can two computers share one printer?

Open “Devices and Printers” on the second computer, click “Add a printer,” select the “Add a network, wireless or Bluetooth printer” option, click on the printer, click “Next,” and then follow the remaining prompts to finish adding the shared printer. Both computers can now use the printer.

What is IP address for printer?

Press the Home button on the printer to display the menu: select Preferences, Options, or Wireless Settings. 2. Check the top of the next box that appears. The IP address is sometimes displayed on its top border.

What are ports 139 and 445 used for?

SMB is a network file sharing protocol that requires an open port on a computer or server to communicate with other systems. SMB ports are generally port numbers 139 and 445. Port 445: Used by newer versions of SMB (after Windows 2000) on top of a TCP stack, allowing SMB to communicate over the Internet.

What port does my printer use?

For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer). For a printer connected to a network via a network interface (wired Ethernet or wireless), the Port should be set to EpsonNet Print Port.

What is port 139 commonly used for?

The port 139 is used for File and Printer Sharing but happens to be the single most dangerous Port on the Internet. This is so because it leaves the hard disk of a user exposed to hackers.

What is the difference between network printer and shared printer?

A shared printer is one where the spooler runs on a server. A network printer can be connected to your local spooler as a local printer via TCP/IP etc but is designed to be a shared printer by being connected to a print server and then shared.